Battery Charging; Battery Charge Status; Calls - Gigaset C610 ip Manual

After successfully configuring the settings, you will briefly see the following display:
Connection Wizard
‰
Connection
assignment
complete
Completing the installation
The handset then returns to idle status (an example of the display in idle status):
Displays
u
Reception between the base and the handset:
– Good to poor: Ð i Ñ Ò
– No reception: ¼ (red)
Green: Eco Mode activated
u

Battery charge status:

– { white: charged over 66%
– { white: charged between 34% and 66%
– y white: charged between 11% and 33%
– y red: charged below 11%
– y flashes red: battery almost empty (less
than 10-minutes talktime)
– xy xy x{ x{ white: battery charging
u
INT 1
Internal name of the handset
Please note
If you have chosen a color scheme with a white background, the white symbols
are displayed in black.
Gigaset C610A IP: the answering machines of the base to which you assigned a
receive connection are activated and switched on in answer and record mode with
a standard announcement
sage on the display, for example.
¢
( page 112). This is shown by the AM 1+2 on mes-
First steps
i V
07:15 am
INT 1 Feb 14
AM 1+2 on

Calls

37