Sleep Mode; Display Brightness - Logitech Squeezebox Boom Quick Start Manual

20
The default snooze length is nine minutes. If you have installed SqueezeCenter,
you may change the snooze length:
1. Launch the SqueezeCenter web interface
2. Click on the
3. From the left pull-down list, select the player you want to configure
(this step is not necessary if you have only one Squeezebox player)
4. From the right pull-down list, select
5. Scroll to the bottom of the page and adjust the slider labeled
Length in minutes.

Sleep mode

As covered earlier, when the alarm is sounding, the large button on Squeezebox
Boom's top panel functions as a snooze button. The rest of the time, it controls sleep
mode, allowing you to set a timer for your Squeezebox Boom to automatically turn
itself off. The SLEEP
Press and hold the
to turn off Squeezebox Boom at the end of the song.
Press and hold it again (or tap the
off Squeezebox Boom after 15 minutes.
Continue the process of pressing and holding the
sleep time to 30 minutes, 45 minutes, 60 minutes, 90 minutes and, finally,
to cancel sleep mode.

Display Brightness

Squeezebox Boom has a built-in light sensor that allows it to adjust the brightness of
the display to match lighting conditions. However, you may override this by selecting
Settings > Display > Brightness from the Home Screen.
From the Brightness menu, you can select your desired brightness when Boom is
playing a track, stopped, or off. For each item you can choose automatic brightness
adjustment, or manually select the brightness.
Player tab
button on the remote control also serves the same function.
SLEEP button once (or tap the
Alarm Clock.
SLEEP
SLEEP
button on the remote again) to turn
SLEEP
Logitech
Snooze
button on the remote)
button to set the
®