Logitech Squeezebox Boom Quick Start Manual page 12

Logitech Squeezebox
set
up Squeezebox Boom and connect
netvvork
1. Slide open the battery compartment door on the remote to expose the battery, peel
the protective tab from the battery, and then close the battery compartment door.
2. Optional: If you'd prefer to connect to your network using
connect your own ethernet cable now.
3. Slide the plug adapter into the power supply and make sure it snaps into place. Plug
the barrel connector into the AC input on Squeezebox Boom's rear panel.
4. Plug the power supply into an electrical outlet. Squeezebox Boom will automatically
power on.
5. Press
on the remote, or press the scroll wheel on the front panel. (As covered
RIGHT
in Getting to know Squeezebox Boom, the
remote perform the same function as turning the wheel left or right. Pressing
on the remote performs the same function as clicking the wheel. For the rest of this
section, we'll refer to using the various buttons on the remote, but you can use the
scroll wheel as well.)
6. You'll see a menu giving you the choice of connecting via a wired or wireless
network. Use the
12
BOOfT
and buttons to make your selection, and press
UP DOWN
a
wired connection,
and buttons on the
UP DOWN
it
your
to
RIGHT
RIGHT.