Epson Stylus Photo R800 Service Manual page 51

EPSON Stylus Photo R800
Occurrence
Phenomenon Detail
Timing
At power-on After the Carriage has
detected the HP, an error is
displayed on the LED and
EPW3.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
TROUBLESHOOTING
Table 3-10. Phenomenon-Based No Ink Cartridge/Ink Cartridge Error Check Points
Faulty Part/
Part Name
Carriage Unit 1. Check that the Electrodes in the Carriage, which make
contact with the CSIC Board, are not bent.
Electrodes
CSIC FFC 1. Check that the CSIC FFC is connected to the CSIC Board
Connector and Main Board Connector (CN10).
CSIC Board Connector
2. Check the CSIC FFC for damage.
CSIC Board 1. Check the CSIC Board for damage.
Check Point
CSIC FFC
Main Board
Connector
CSIC Board
Overview
Revision A
Remedy
1. Change the Carriage Unit for a new one.
1. Connect the FFC to the CSIC Board and
Main Board Connectors.
2. Change the CSIC FFC for a new one.
1. Change the CSIC Board for a new one.
52