Honeywell TE831W-2 User Manual page 13

- Selects the next available window counter-clockwise
A. UP
- Increases parameters
-If depressed and held, activates an atomic time signal search
- Selects the next available window clockwise
B. DOWN
- Decreases parameters
-If depressed and held, activates all remote sensors signal search
- Alternates the parameters for the selected window
C. SET
- If depressed and held, enters into the programming mode or
changes parameter's units
- Pressed again closes programming mode and confirms selected
parameters
- Manually selects the channel # for receiving temperature and
D. CHANNEL
humidity sensor data
- Enables the temperature and humidity channel auto-scan mode
- Records: moon phase, temperature, humidity, rainfall and wind
E. MEMORY
records. Then stores in memory
- Moon phase: Determined by the day of month interval
- Sets and stores pressure & altitude units in Memory
- Allows displaying the sea-level pressure history
F. HISTORY
- Displays alarm times and programmed alerts for temperature,
G ALARM/CHART
rainfall and wind.
- Press and hold, to enter the alarm/alert programming mode
- Press and hold in pressure and forecast window, to view
different bar charts
- Sets the light sensor to: automatic, on or off
H. SENSOR
– AUTO, ON, OFF
- Adjusts the automatic light sensor sensitivity
I. SENSITIVITY
– HIGH/LOW
- Illuminates the display backlight for 5 seconds
J LIGHT/SNOOZE
- Activates Snooze delay for alarms (programmable 1 to 15
minutes)
- Connects main unit to the power outlet through the AC to 7.5V
K. AC/ DC
DC adapter provided
ADAPTOR INPUT
- USB Port provides PC connectivity
L. USB Port
13