Tool Menu - Asus Z97-K User Manual

2.9

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the submenu.
2.9.1 ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
For more details, see section 2.1.2 ASUS EZ Flash 2.
2.9.2 Setup Animator [Enabled]
Enables or disables the Setup animator. Configuration options: [Disabled] [Enabled]
2.9.3 ASUS Overclocking Profile
This item allows you to store or load multiple BIOS settings.
The Overclocking Profile items show Not assigned if no profile is created.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
•
•
Profile Name
Allows you to create a name for the profile you want to save.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load/Save Profile from/to USB Drive
This item allows you to load or save profile from your USB drive, load and save profile to your
USB drive.
2-50
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
Chapter 2: Getting started