System Agent Configuration; Graphics Configuration; Dmi Configuration - Asus H971-PLUS User Manual

Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better energy saving
conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration
options: [Disabled] [Enabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T. (Self‑Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power‑on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
Hot Plug [Disabled] (SATA6G_1 - SATA6G_4)
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
2.6.4

System Agent Configuration

CPU Display Audio [Enabled]
Enable this item to support CPU display audio output. Configuration options: [Enabled]
[Disabled]
DVI Port Audio [Off]
Enable this item to have an audio output when converting DVI to HDMI output. Configuration
options: [On] [Off]

Graphics Configuration

Allows you to select a primary display from CPU and PCIE graphical devices.
Primary Display [Auto]
Allows you to select the primary display from CPU and PCIE graphics devices.
Configuration options: [Auto] [CPU Graphics] [PCIE]
CPU Graphics Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the CPU
graphics. Configuration options: [Auto] [32MB] [64MB] [96MB] [128MB] ~ [448MB]
[480MB] [512MB]
Render Standby [Auto]
This item allows you to enable Intel
power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi‑monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]

DMI Configuration

This item allows you to control various DMI (direct media interface) to run at PCI‑E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI‑E 2.0 speed. Configuration options:
[Enabled] [Disabled]
ASUS H97I-PLUS
Graphics Render Standby support to reduce iGPU
®
2‑33