Troubleshooting; Ipi System Gas Control Valve - Montigo L52DF-ST Installation And Maintenance Manual

Troubleshooting SIT Nova 820
The following is a troubleshooting chart of possible problems:
PROBLEM
Noisy Pilot Flame Locate pilot adjustment screw on
gas control valve. Flame is decreased by
turning adjustment screw clockwise.
Pilot won't ignite Disconnect remote wires and try to
light pilot. If pilot now works, remote
connections are faulty. Check wiring
diagram figure 19.
Main burner will 1. Check wiring (see figure 19).
not light 2. Check wall switch for proper con-
nection.
Troubleshooting: (IPI System).
The following is a troubleshooting chart of possible problems:
PROBLEM SOLUTION
Pilot won't ignite or spark. - Check the on the batteries on the
remote or the receiver.
- Check the green LED on AC adaptor
-Check the green ground wire under
the valve
Main Burner Will not light - Check the wiring diagram on the valve
as per diagram seen in Figure 12.
Fan not working - Make sure the fan speed control is on.
- 10 minute delay to turn on.
All spare parts, optional fans, and optional trim finishes are available from your local Montigo dealer.
XG0811 -100511.1
Maintenance
CORRECTIVE ACTION
If your fireplace still does not operate correctly, consult your local Montigo dealer.
All service and repairs should be performed by a qualified Technician.
L52DF-ST* Indoor Gas Fireplace
Page 23