System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH
Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto)
Memory Frequency (Mhz)
The first memory frequency value is the normal operating frequency of the memory being used; the
second is the memory frequency that is automatically adjusted according to the CPU Host Frequency
(Mhz) and System Memory Multiplier settings.
DRAM Timing Selectable (SPD)
Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default),
Manual.
>>>>> Standard Timing Control
CAS Latency Time
Options are: Auto (default), 4~11.
tRCD
Options are: Auto (default), 1~15.
tRP
Options are: Auto (default), 1~15.
tRAS
Options are: Auto (default), 1~63.
>>>>> Advanced Timing Control
Advanced Timing Control
x tRRD
x tWTR
x tWR
x tRFC
x tRTP
x Command Rate (CMD)
>>>>> Channel A
Channel A Timing Settings
Channel A Driving Settings
>>>>> Channel B
Channel B Timing Settings
Channel B Driving Settings
higf : Move
Enter: Select
F5: Previous Values
tRRD
Options are: Auto (default), 1~15.
tWTR
Options are: Auto (default), 1~31.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Timing Control
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Auto
Auto
Auto
Auto
Auto
Auto
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
F10: Save
- 35 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup