Manual Control Operation (Model Hcm-630 Series And Hcm-640Bw); Power; Output/Fan Speed Control; How To Set The Humidistat - Honeywell QuietCare HCM-630 Series Owner's Manual

Cool moisture humidifiers
Hide thumbs Also See for QuietCare HCM-630 Series:
Table of Contents

Advertisement

Available languages

Available languages

QuietCare_OM_Rev2.qxd

Manual Control Operation (Model HCM-630 Series and HCM-640BW)

P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH
WET HANDS AS AN ELECTRICAL SHOCK COULD
OCCUR.
• With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
O U T P U T / F A N S P E E D C O N T R O L
• Set the fan speed to the desired position (Fig. 4).
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For minimum operation (ideal for nighttime use)
• Continuous Mode: Your unit will run continuously at your
selected speed until you shut it off or it runs out of water.
NOTE: Turn the humidifier OFF if the humidity level feels too moist or you notice condensation forming on
the walls and/or windows.
A D V A N C E D M I S T
The Advanced Mist
Humidistat allows you to adjust and select the humidity level to your personal
preference. Your humidifier will turn on and off throughout the day and night to maintain the desired
humidity level you have selected.
H O W T O S E T T H E H U M I D I S T A T
First, turn the humidifier on and select your output/speed level.
Set the Advanced Mist
clockwise
to the end (Fig. 4).
• Let the humidifier run on high for a least one hour or until
your room has reached a comfortable humidity level.
• At this point, slowly turn your Humidistat knob counter-
clockwise
until the humidifier shuts off and the Desired
Humidity light illuminates (Fig. 5).
• Now that your Humidistat knob is set, the humidifier will
automatically turn back on when your room drops below
your comfort setting and will automatically turn off again
when the setting is reached.
NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist
Humidistat may be set too low. Turn the dial clockwise
will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have
reached optimal humidity.
10/25/06
2:11 PM
H U M I D I S T A T
Humidistat on High by turning the knob
Page 5
Fig. 4
Fan
Speed
Knob

Power

Light
(Illuminated)
Fig. 5
Power
Light
(Illuminated)
to the end (Fig. 4). The Desired Humidity light
Desired
Humidity
Light
Humidistat
Knob
Desired
Humidity
Light
(Illuminated)
5

Advertisement

Table of Contents
loading

Table of Contents