Philips 32PFL3406D/78 Service Manual page 27

Alignments L11M1.1L LA 6. EN 27
How to Change Options Codes
An option code (or "option byte") represents eight different
options (bits). All options are controlled via ten option bytes
(OP#1... OP#10).
Activate SAM and select "Options". Now you can select the
option byte (OP#1... OP#10) with the CURSOR UP/ DOWN
keys, and enter the new 3 digit (decimal) value. For the correct
factory default settings, see the sticker inside the set.
back to
2011-Jun-24
div. table