Softener Dispenser - Daewoo DWF-760 Service Manual

Softener Dispenser

This is the device to dispense the softener automatically by centrifugal force.
This is installed inside the auto-balancer.
FUNCTIONAL PRINCIPLE
1 Softener stays in room (A) when poured into softener inlet.
2 Softener moves from (A) to (B) by centrifugal force during intermittent spin process.
3 Softener flows from (B) to (C) during rinse process next to intermittent spin.
4 Softener moves from (C) to (D) by centrigfugal force during second intermittent spin.
After spin process is finished, the softener is added into the tub through softener outlet.
FLOW OF THE SOFTENER
Wash
Normal
Program
FLOW OF THE SOFTENER INSIDE OF THE BALANCER
Room inside
A
the balancer
Centrifugal force
Flowing by weight
NOTES
Softener moves into the next room when r.p.m of the tub is more than 100 r.p.m.
HOW TO CHECK MOVEMENT
Pour a reasonable amount of "MILK" into softener dis-
penser and operate the washer with no load. In final
rinse cycle, make sure that the milk is added into the
tub through softener outlet.
10 EXPLANATION
Intermittent
Spin
Centrifugal
force
(A) (B)
B C
Hold Intermittent
Spin
Flow in Centrifugal
force
(C) (D)
D
Balancer
Softener inlet
Rinse Spin
Flow in
Softener
outlet
B D
C
A