SOFTENER DISPENSER
This is the device to dispense the softener automatically by centrifugal force.
This is installed inside the auto-balancer.
FUNCTIONAL PRINCIPLE
1. Softener stays in room (A) when pour the softener to softener inlet.
2. Softener move (A) to (B) by centrifugal force during intermediate spin process.
3. Softener flow (B) to (C) during rinse process next of intermediate spin.
4. Softener move (C) to (D) by centrifugal force during second intermediate spin.
And after finish spin process, softener drop between tub and outer tub ass'y from softener outlet.
FLOW OF THE SOFTENER
Wash
Normal
Centrifugal force
Course
(A)
FLOW OF THE SOFTENER INSIDE OF THE BALANCE
Room inside
the balancer
Flow by
Centrifugal
force
NOTE: Softener moves into next room when r.p.m of the tub is more than 100 r.p.m.
HOW TO CHECK MOVEMENT
Pour a reasonable amount of "MILK" into softener dispenser
and operate the washer with no load.
In final rinse cycle, make sure than the milk is added into the
tub through softener outlet.
intermediate
Spin
Flow by
weight
(B)
A
B
Hold
intermediate
Spin
Centrifugal force
(C)
C
D
Balancer
Softener inlet
7
Rinse
Flow by
weight
(D)
Softener outlet
D
B
C
A
Spin