How To Check The Clutch Spring Problem - Daewoo DWF-760 Service Manual

How To Check The Clutch Spring Problem

PROBLEM
1) THE LAUNDARY IS IN THE SPIN TUB UNEVENLY WHEN JUST STARTING SPIN PROCESS.
2) THEREFORE, IT CAUSE THE SERIOUS NOISE AND VIBRATION WHEN WASHING AND SPINNING PROCESS
OR SUPPLING WATER IRREGULARY WHEN SPINNING PROCESS AND CAUSE SHORT OF SPIN PERFOR-
MANCE.
CHECKING METHOD
IN THIS CASE, YOU MUST EMPTY THE SPIN TUB FIRST.
1) TO CHECK THE REVOLUTION OF SPIN TUB. IF THE SPIN TUB DOES NOT REVOLVE AND ONLY THE PUL-
SATOR IS TURNING, THAT IS CLUTCH SPRING DEFECT.
2) TO CHECK THE SPIN SPEED(RPM) BETWEEN SPIN TUB AND PULSATOR. IF YOU FIND THE DIFFERENT
SPIN SPEED BETWEEN SPIN TUB AND PUSATOR, THIS IS ALSO CLUTCH SPRING DEFECT.
IN THIS CASE, WE ARE GOING TO SUPPLY THE CLUTCH BOSS ASSEMBLY INSTEAD OF GEAR MECHANISM
ASSEMBLEY. PLEASE REFER TO FOLLOWING FIG.
THE CLUTCH BOSS ASSEMBLY
NO. PARTS NAME
1 CLUTCH SPRING
2 CLUTCH BOSS
3 GREASE
PACKING PACKING THE CLUTCH BOSS ASS'Y
METHOD BY USING VINYL PACK
CLUTCH BOSS ASS'Y PART CORD : 3610028000
SPECIFICATION CODE
SWP-A, 1.5X1.2 4505E37073
PP 3619301300
beacon#325 3g
Q'TY
1
1
1
THE REPAIR 19