USING YOUR DEFAULT WINDOWS AND KEYS
The default 5560 IPT windows and keys are shown and described below. The default
Phone window provides access to your programmed feature keys.
Figure 3. Default Display Windows
5560 IPT Default Window and Keys
Refer to Figure 3 above.
Feature
1) Softkeys
2) Float Keys
3) Programmable Keys
Mitel 5560 IPT User Guide
Function
Allow you to access the call control
features that pertain to the feature you are
currently using. These keys are non-
programmable and are specific to the
application or the state of the terminal. The
5560 IPT provides 6 softkeys, 3 on each
side. Softkey prompts appearing in the
display correspond to the relevant call, so
you may see different contextual softkey
prompts on each side at the same time.
Display the queue of ringing calls. Up to
six concurrent incoming calls appear on
float keys with associated labels. For more
information see "Edit Float Key Behavior
on page 20.
Launch specific call control features. Press
the Menu key and select the Settings
application to program these keys. The
7