Honeywell HD-DVR-1004 User Manual page 19

Recording
Mode
Recording
Length
Cyclic mode
Record Search
Playback Mode
Record and
playback
Various
Switch Ways
Multi-channel
Playback
Display Modes
Zoom
Backup
Backup Mode
function
Network
Network control
Function
Motion
Detection
Video Loss
Motion
Detection and
External Alarm
Alarm
Manual
Control
Alarm Input
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual
recording>schedule recording
1 to 120 minutes single record duration (Default 60 minutes)
When hard disk is full, system can overwrite previous video file.
Various search engines such as time, type and channel.
Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Can switch to previous or next file or any file in current play list.
File Can switch to file on other channel of the same time (if existing).
Supports continuous file playback; when a file is ended, system
automatically plays the next file in the current channel
Support maximum 4-
channel simultaneous
playback.
Switch between adaptive window/full screen during playback
When in one-window full-screen playback mode, you can select any
zone to zoom in.
HDD backup
Support peripheral USB backup device. (Flash disk, portable HDD
and etc.)
Supports USB burner (extension function).
Supports network download and backup
Remote live view of all channels.
DVR configuration through web browser client
Upgrade or maintenance via web browser client
View alarm information such as external alarm, motion detection and
video loss
Supports network PTZ control
File download backup and playback
Duplex transparent COM
Intercom
Zone setup: 396 (PAL, 22×18) or 330 (NTSC, 22×15) detection
zones.
Various sensitivity levels
Can activate recording, external alarm or screen message prompt in
specified period.
Alarm can activate external alarm or screen message prompt.
Can activate recording, external alarm or screen message prompt in
specified period.
Alarm Enables or disables alarm input channel.
Supports manual alarm output.
4-ch alarm
（ Normal open or
normal close）
recording> alarm
Support maximum
8-channel
simultaneous
playback.
input 8-ch alarm input
（ Normal open or
normal close）
Honeywell
recording>motion detection
Support maximum 16-
channel simultaneous
playback.
16-ch alarm
（ Normal
open
normal close）
input
or
5