Honeywell HD-DVR-1004 User Manual page 136

Web Client Operation
122
Parameter Function
Compression H.264
It includes main stream, motion stream and alarm stream.
You can select different encoding frame rates form
different recorded events.
System supports active control frame function (ACF). It
Main Stream allows you to record in different frame rates.
For example, you can use a high frame rate to record
important events, and record scheduled events in a lower
frame rate and it allows you to set different frame rates for
motion detection record and alarm record.
Select extra stream if you enabled the extension stream to
Extra Stream
monitor.
Recorded file only contains video by default. If you need
Audio/Video audio, you should select the option to enable audio
function here.
Main
BCIF/HD1/CIF/QCIF.
Resolution
Extra stream of any channels supports only CIF/QCIF.
PAL 1-25f/s and NTSC 1-30f/s for any channels in D1/CIF
and QCIF resolution.
Frame Rate
All channels with D1 resolution up to 25/30 f/s.
There are two options: VBR and CBR.
Bit Rate Type
Please note, you can set video quality in VBR mode only.
The value ranges from 1 to 6. Level 6 is the best video
Quality
quality.
In CBR mode, actual bit rate is limited by this value
The value only affects average bit rate in VBR mode.
Bit Rate
Please refer to recommend bit rate for the detailed
information.
Recommended Recommended bit rate value according to the resolution
Bit Rate and frame rate you have set.
Here you can set video brightness, contrast, hue,
saturation and gain.
Color Setting
The value ranges from 0 to 100. Default value is 50.
Here you can privacy mask the specified video in the
Cover area
monitor video.
(privacy mask)
System max supports 4 privacy mask zones.
You can enable this function so that the system overlays
Time Title
the time information in the video window.
stream of any channels supports D1/