Xerox DocuColor 1632 Service Manual page 228

12-104 H Transport Exit Sensor On
The H Transport Exit Sensor did not detect paper within the specific time after the H Transport
Entrance Sensor has detected the paper. (The specified time differs depending on the paper
size.)
Procedure
Enter dC330 [012-104] and press Start. Actuate and deactuate the H Transport Exit Sensor.
The display changes.
Y N
Repair the sensor as required (PL
mechanically good, check the circuit of the H Transport Exit Sensor
Check H Transport Belts, H Transport Belt Drive Rolls, and Guides on H Transport Cover for
installation or damage problems. Repair as required
Entrance
Sensor
Exit
Sensor
Figure 1 Component Location
Figure 2 H Transport Exit Sensor CD
Status Indicator RAPs
12-104
17.4) for mechanical problems. If the sensor is
(Figure 2).
(PL 17.3, PL 17.4).
Interlock
Sensor
6/02
2-198
Figure 3 Finisher PWB
Prelaunch Training/Review
DC1632/2240