View The Microsd Card Memory; Format The Microsd Card; Unmount The Microsd Card - Kyocera Hydro VIBE User Manual

1. Touch
> > Settings
2. Read the disclaimer and touch OK to continue. Wait for "SD card safe to remove" to appear in
the Status bar.
3. Turn the phone off and remove the back cover. See Set Up Your Phone.
4. Lift the battery and remove it from the battery compartment.
5. Gently pull the microSD card out from the slot.
6. Place the battery back into its compartment and replace the battery cover.
Note: You can easily damage the microSD card by improper operation. Please be careful when
inserting, removing, or handling the microSD card.
Note: Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.

View the microSD Card Memory

The Storage settings menu gives you access to your microSD card memory information.
With the microSD card inserted, touch
n
available memory space will be displayed.)

Format the microSD Card

Formatting a microSD card permanently removes all files stored on the card.
1. Touch
> > Settings
2. Scroll down the screen, touch Erase SD card > Erase SD card.
3. Touch Erase everything to confirm the process.
Note: The formatting procedure erases all the data on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of important data, please check the contents before you
format the card.

Unmount the microSD Card

When you need to remove the microSD card, you must unmount the microSD card first to prevent
corrupting the data stored on it or damaging the microSD card. Since you will remove the battery first
Tools and Calendar
> Storage > Unmount SD card.
> > Settings
> Storage.
> Storage. (The total and
142