Kyocera Hydro VIBE User Manual page 117

Set Up Portable Wi-Fi Hotspot
1. Touch
> > Portable Wi-Fi hotspot
2. Touch OK on the introduction screen.
3. Touch the Portable Wi-Fi hotspot checkbox to activate the service.
– or –
1. Touch
> > Settings
2. Touch the Portable Wi-Fi hotspot checkbox to activate the service.
Note: Using both 4G LTE service and hotspot drain your phone's battery at a much faster rate than
when using any other feature combination. The best way to keep using the phone as a hotspot is to
have it connected to a power supply.
Important: Write down the passkey (password) for this communication (shown onscreen).
Connect to Portable Wi-Fi Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your phone hotspot from the network list.
The name for your phone hotspot can be changed by touching
l
hotspot
3. Select this device and follow your onscreen instructions to enter the passkey (provided on the
Portable Wi-Fi hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Configure Portable Wi-Fi Hotspot
1. Touch
>
– or –
Touch >
Fi hotspot.
2. Set the following options:
Network SSID: Sets your network name.
l
SSID broadcast: Selects the check box to broadcast the SSID.
l
Web and Data
> More... > Tethering & portable hotspot.
> Network SSID.
> Portable Wi-Fi hotspot
> Settings > More... > Tethering & portable hotspot > Set up Wi-
.
>
.
> Portable Wi-Fi
107