Reconnect A Headset Or Car Kit; Disconnect Or Unpair From A Bluetooth Device - Kyocera Hydro VIBE User Manual

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and then turning on the headset. However, sometimes you
will need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.
1. Touch
> > Settings
2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on.
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the PAIRED DEVICES list.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect or
Unpair from a Bluetooth Device, and then follow the instructions in Connect a Bluetooth Headset
or Car Kit.

Disconnect or Unpair from a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. Touch
> > Settings
2. In the Bluetooth devices section, touch the device name to disconnect.
3. Touch Disconnect.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To connect to
the other device again, you may need to enter or confirm a passcode again.
1. Touch
> > Settings
2. On the PAIRED DEVICES list, touch
3. Touch Unpair.
Tools and Calendar
> Bluetooth.
> Bluetooth.
> Bluetooth.
next to the device to unpair.
138