Adding & Registering Handsets - AT&T TL76108 User Manual

Appendix D
Adding & registering handsets
Your telephone can accommodate up to eight cordless handsets. You can add
new handsets (TL76008, sold separately) to the TL76108 at any time.
The handset provided with your TL76108 is automatically registered as
handset 1. Additional handsets will be assigned numbers in the order they are
registered (handset 2, handset 3, and handset 4 etc.).
NO BASE
SUBSCRIPTION
OK
ENTER BASE ID
# ###############
OK
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
OK
ENTER BASE ID
# ###############
OK
PLEASE
WAIT!!
T23 PD
SEARCHING
FOR BASE
NEW MENU
HANDSET X
RDL MENU CID
Handsets purchased separately need to be registered to
the telephone base before use. When first purchased,
all optional accessory handsets will show NO BASE
SUBSCRIPTION and ENTER BASE ID on the screen
alternatively. The new handset may need to be charged
for five minutes before registering to the telephone base.
Register a handset to your telephone base
Make sure the handset battery is installed and charged
properly. You have to enter a 15-digit telephone base ID You have to enter a 15-digit telephone base ID
to register the handset to the telephone base.
Find the telephone base ID and register the handset:
1. On the telephone base, press the MENU softkey when
the phone is not in use to enter the feature menu. Press
the or softkey to scroll to the
menu, then press the OK softkey. The telephone base
ID will be displayed.
2. On the handset, use the keypad buttons to enter the
telephone base ID and press the OK softkey.
– Press the
3. The handset will first display PLEASE WAIT!!, then T23
PD followed by SEARCHING FOR BASE. The screen
will finally display HANDSET X when the registration is
successful.
NOTES:
1. If the registration is not successful, the display will show NO BASE
SUBSCRIPTION. Try the registration process again.
2. If an incorrect base ID is entered, the base ID will disappear and ENTER
BASE ID will be displayed.
softkey to move the cursor.
72
DISPLAY BASE-ID