Switching Between Lines - AT&T TL76108 User Manual

Telephone operation
NOTES:
1. While on call, if a call
comes in from the other
line, you will hear a brief
ring and the display will
show INCOMING CALL ON
LINE X followed by CID
information if applicable.
2. If the call that is on
hold is not resumed in
five minutes, the phone
will ring. The screen will
display CALL ON HOLD
RING BACK! If the call
is not answered in 30
seconds, the call will be
disconnected.
3. If you are on a call on the
other line, there will be no
ring back and the call on
hold will disconnect in five
minutes without warning. .
Options while on calls

Switching between lines

On a cordless handset:
While on call, you can press LINE 1/
LINE 2/ at any time to switch to the call
FLASH
on the other line, whether you have pressed the
HOLD softkey or not, without dropping either call.
Example:
1. Make or answer a call.
Press LINE 1/
2.
or answer a call on the other line automatically
places the first call on hold.
3. To return to the first call, press LINE 1/
or LINE 2/
FLASH
You can repeat this step at any time to switch
to the call on the other line without dropping
either call.
At the telephone base:
While on call, you must press the HOLD softkey
before making or answering a call on another line.
Example:
1. Make or answer a call, then press the HOLD
softkey.
2. Press LINE 1 or LINE 2 to select the unused
line to make or answer a call on the other line.
3. To return to the first call, press the HOLD
softkey to put your current call on hold, then
press LINE 1 or LINE 2 to select the previous
line. You can repeat this step at any time to
switch to the call on the other line without
dropping either call.
21
or LINE 2/
FLASH
to select the previous line.
or
FLASH
to make
FLASH
FLASH