Sharp FO-77 Service Manual page 7

4
Insert one end of the line cord into the jack on the back of the ma-
chine marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Note: The fax machine is set for touch-tone dialing. If you are on a
pulse dial (rotary) line, you must set the fax machine for pulse dialing.
Press the keys on the operation panel as follows:
1. Press these keys:
The display will show:
DIAL MODE
2. Press 1 to select tone (touch-tone)
dialing, or 2 to select pulse (rotary)
dialing.
3. Press the STOP key to return to the date
and time display.
3. Removing the packing paper
1
Grasp the finger hold and pull up to open the operation panel.
FUNCTION
4
PULSE
TONE
2
1
or
STOP
2
Flip up the front paper guide.
3
Remove the tape and packing paper from the cutter unit.
4
Flip down the front paper guide and then close the operation panel.
1 – 5
FO-77U
UX-66U