Clearing Bypass Transport Paper Jams (4890 Only) - Xerox DocuPrint 4850 NPS Troubleshooting Manual

Clearing bypass transport paper jams (4890 only)

XEROX DOCUPRINT 4850/4890 NPS TROUBLESHOOTING GUIDE
6. Close the side and top covers.
7. Press the Continue button to resume printing.
To clear bypass transport paper jams on 4890:
1. Verify that a sheet is caught between the bypass transport and
the finishing device. If a sheet is there, remove it and discard it.
2. Open the top cover of the bypass transport by lifting upward on
the recessed handle.
3. Remove and discard any paper you now see in the bypass
transport.
4. Grasp the handle again and slide the top cover to the right. This
exposes the remainder of the bypass transport paper path.
5. Remove and discard any paper you see.
CLEARING PAPER MISFEEDS AND JAMS
4-23