Table of Contents
Advertisement
29. Remove the No. 2 hybrid battery intake duct
(1) Remove the clip and No. 1 hybrid battery
intake duct.
30. Remove the HV battery.
Caution:
Be sure to wear insulated gloves and
protective goggles.
Notice:
Insulate the terminals of the removed frame wire with insulating tape.
(1)
Remove the 2 bolts from each back door damper stay bracket UPR.
Hint:
Have an assistant support the back door.
(2)
Rotate each back door damper stay bracket UPR upside-down as shown in the illustration and
install them with the 2 bolts.
Hint:
This step is performed to provide additional clearance and prevent interference between the
vehicle body and mini crane when removing or installing the HV battery.
66
Hide quick links:
Advertisement
Table of Contents
