Skid Plate, Scraper - Honda HS828 Owner's Manual

Skid plate, Scraper
Adjust the skid plates for the auger ground clearance best suited to your
snow removal conditions.
m
To prevent accidental starting, turn the engine switch to the
OFF position and disconnect the spark plug cap.
1. Place the snowblower on a level surface and set the height adjustment
pedal in the middle position.
2. Move the skid plates up or down to obtain the desired auger ground
clearance.
For ordinary snow:
4-8 mm (0.16-0.31 in)
For finishing:
O-5 mm (O-0.20 in)
For use on uneven surfaces: 25-30 mm (0.98- 1 .18 in)
3. Adjust the scraper ground clearance to 2-4 mm (0.08-0.16 in).
(0.08-0.16 in)
SKID PLATE
NOTE: Adjust the skid plates equally on both sides.
Be sure to tighten the skid plate and scraper bolts securely after making
adjustments.
(1
Do not use the snowblower on rough or uneven surfaces with
the auger ground clearance set for hard snow or surfaces. This may cause
serious damage to the snow throwing mechanism.
13