SERVICING YOUR HONDA SNOWBLOWER
SHEAR BOLT REPLACEMENT PROCEDURE
1. Place the snowblower on a firm, level surface.
2. Turn the engine switch
OFF, and remove the cap from the spark plug.
3. Clean the auger and blower of snow, ice or any other foreign particles.
4. Check the entire snow clearing mechanism.
5. Replace any broken shear bolts. Tighten securely.
BLOWER SHEAR BOLT
6mm SELF-LOCKING NUT
/
6mm HEX NU?(2) AUGER SHEAR
BOLT(2)
49