Shear Bolt Replacement Procedure - Honda 00X317677230 Owner's Manual

SHEAR BOLT REPLACEMENT PROCEDURE

1. Place the snowblower on a firm, level surface.
2. Turn the engine switch OFF, and remove the cap from the spark plug.
3. Clean the auger and blower of snow, ice or any other foreign
particles.
4. Check the entire snow clearing mechanism.
5. Replace any broken shear bolts. Tighten securely.
BLOWER SHEAR BOLT
SERVICING YOUR SNOWBLOWER
6 mm SELF-LOCKING NUT
6 mm HEX NUT (2) AUGER SHEAR BOLT (2)
49