Orientation Linked Af Point; Manual Af Point Selection Pattern - Canon EOS 70DW Instruction Manual

C.Fn II -9
You can set the AF area selection mode and manually-selected AF point
separately for vertical shooting and horizontal shooting.
0: Same for both vertical/horizontal
The same AF area selection mode and manually-selected AF point (or
zone) are used for both vertical shooting and horizontal shooting.
1: Select separate AF points
The AF area selection mode and manually-selected AF point (or zone) can
be set separately for each camera orientation (1. Horizontal, 2. Vertical with
the camera grip at the top, 3. Vertical with the camera grip at the bottom).
Convenient when, for instance, you want to keep using the right AF point
during all camera orientations.
When you manually select the AF area selection mode and AF point (or
zone) for each of the three camera orientations, they will be set for the
respective orientation. Whenever you change the camera orientation, the
camera will switch to the AF area selection mode and manually-selected AF
point (or zone) set for that orientation.
C.Fn II -10
During manual AF point selection, the selection can either stop at the outer edge
or it can move to the opposite AF point.
This works with single-point AF (manual selection) and 19-point automatic
selection AF with AI Servo AF.
0: Stops at AF area edges
Convenient if you often use an AF point along the edge.
1: Continuous
Instead of stopping at the outer edge, the selected AF point continues to the
opposite side.

Orientation linked AF point

Manual AF point selection pattern

3 Custom Function SettingsN
373