Af Point Selection - Canon EOS 70DW Instruction Manual

Selecting the AF Point Manually
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
When you hold down the <Q> button and turn the <6> dial, you can
select a vertical AF point.
When you press the <S> or <B> button, the LCD panel displays the
following:
• 19-point automatic selection AF and Zone AF (manual zone selection):
AF
• 1 pt AF (Manual selection): SEL
With [8C.Fn II-10: Manual AF pt. selec. pattern], you can set either
[Stops at AF area edges] or [Continuous] (p.373).
Press the <S> or <B> button.
1
(9)
The AF points will be displayed in the
viewfinder.
In the Zone AF mode, the selected
zone will be displayed.
Select an AF point.
2
The AF point selection will change in
the direction you tilt <9>. If you
press <0>, the center AF point (or
center zone) will be selected.
You can also select a horizontal AF
point by turning the <6> dial and
select a vertical AF point by turning
the <5> dial.
In the Zone AF mode, turning the
<6> or <5> dial will change the
zone in a looping sequence.
(Center)/SEL AF (Off center)
S Selecting the AF AreaN
105