Storage / Troubleshooting - Vax HF86-FM-T Instruction Manual

Vax V-102E User Guide v6.qxd
www.vax.co.uk
8. Storage
IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet and rewind the power
cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
8

storage / troubleshooting

15/8/07 16:26 Page 8
9. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Solution: Plug in securely.
Cause:
Solution: Check fuse or breaker.
Cause:
Solution: Push on/off switch to 'on' .
Cause:
Solution: Switch off and unplug the vacuum cleaner.
Cause:
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Solution: Review dust bag replacement.
Cause:
Solution: Empty dust bag.
Cause:
Solution: Remove, clean and replace filters.
PROBLEM: Accessories won't pick up.
Cause:
Solution: Refer to section 5.
Cause:
Solution: Refer to section 7.
Cause:
Solution: Refer to section 7.
Not properly plugged into electrical outlet.
No electricity in the electrical outlet.
On/off switch not turned on.
Motor thermostat has tripped.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Blown fuse/tripped breaker.
Dust bag not installed properly.
Dust bag full or blocked.
Clogged filters.
Accessories are not attached correctly.
TurboBrush / TurboTool is clogged.
Hose is not installed correctly.