Storage / Troubleshooting - Vax FORCE3 VZL-118 Series Instruction Manual

Bagless cylinder
Table of Contents

Advertisement

Vax VZL-118 Series User Guide.qxd:04.09
9. Storage
IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet and rewind the power
cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
24/4/09
All manuals and user guides at all-guides.com
10:06
Page 9
10. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in securely.
Cause:
No electricity in the electrical outlet.
Solution: Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution: Push on/off switch to 'on' .
Cause:
Motor thermostat has tripped.
Solution: Switch off and unplug the vacuum cleaner.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Dirt container not installed properly.
Solution: Review dirt container replacement.
Cause:
Dirt container full or blocked.
Solution: Empty dirt container.
Cause:
Clogged filters.
Solution: Remove, clean and replace filters.
PROBLEM: Accessories won't pick up.
Cause:
Accessories are not attached correctly.
Solution: Refer to section 5.
Cause:
TurboBrush / TurboTool is clogged.
Solution: Refer to section 7.
Cause:
Hose / Stretch Hose is not installed correctly.
Solution: Refer to section 7.

storage / troubleshooting

Vax Careline
0870 606 1248
9

Advertisement

Table of Contents
loading

Table of Contents