Mouse Power Management; Operating Hints - Targus PAWM10 User Manual

Mouse Power Management

To power the mouse on and off, slide the on/off switch at the
bottom of the mouse to the desired position.
Sensor strips
When power is on, the mouse goes into "sleep mode" after 8
minutes of no use. To activate the mouse, touch the sensor
strips on the side with your hand.
To save battery power, turn off the mouse while traveling or
when you're not using it.
CAUTION: Turning off the mouse will require you to
synchronize again the next time you turn it back on.

Operating Hints

For optimal performance and RF reception:
• Place the receiver at least 8 inches (20 cm) away from all
electrical devices, such as your monitor, speakers or external
storage devices.
If necessary, use a three-inch extension cable to keep the
receiver away from the computer. Plug the receiver into the
extension cable, and the extension cable to the computer.
• Avoid using the RF mouse on a metal surface. Metals, such
as iron, aluminum or copper, shield the radio frequency
transmission and may slow down the mouse's response time
or cause the mouse to fail temporarily.
Targus Wireless RF Mouse
PAWM10 Mouse
7
Low battery indicator