Troubleshooting - Targus PAWM10 User Manual

Mouse Standby
Current
Mouse Sleep Mode
Current
Modulation Type
Transmission Rate
Error Detection

Troubleshooting

What do I do if the RF mouse does not work?
• Make sure that the polarity of the batteries is correct. The
positive (+) and negative (-) ends of each battery must match
the positive (+) and negative (-) connections in the battery
housing.
• Check that the receiver's USB connector is firmly attached
to the USB port on your computer.
• Verify that the device drivers are installed.
• Make sure you have established a radio link between the
mouse and its receiver. See "Establishing a Communications
Link (All RF Mouse Models)" on page 6
When I use the RF mouse, other wireless devices work
more slowly or fail temporarily – what should I do?
The mouse may cause interference with any cordless,
radio-based device that operates at 27 MHz, such as a
telephone, baby monitor, or toy. To reduce interference, move
the mouse's receiver and the base unit of the affected device as
far away from each other as possible.
Targus Wireless RF Mouse
Below 4mA
Below 50uA
FSK
4K bps
8-bit CRC
11