Volt Meter; Pilot Lamp; Voltage Selector Switch (Dual Voltage System) - Honda EM5000SX Owner's Manual

Pilot Lamp
The pilot lamp is illuminated when the generator is operating normally. It
indicates that the generator is producing electrical power at the 120 or 120/
240 volt receptacles. If the pilot light is illuminated, the volt meter should be
displaying 120 or 240 volts depending on the position of the voltage selector
switch.
When the auto-throttle is in the AUTO position, and there is no load
connected to the generator, the engine will run slower and the pilot light will
be dimmer than at normal operating speed.
Volt Meter
The volt meter,displays the voltage the generator is producing depending on
the position of the voltage selector switch. If the voltage selector switch is in
the "120/240 V" position, the volt meter will display 240 volts. If the voltage
selector switch is in the "120 V ONLY" position, the volt meter will display 120
volts.
Voltage Selector Switch (Dual voltage System)
The voltage selector switches the main power carrying windings of the
generator to produce "12OV ONLY" or "120/24OV". If a 240V appliance is
connected to the 4-prong receptacle, the switch must be in the "120/24OV"
position. If a 120V appliance ONLY is being connected to any of the 120V
3-prong receptacles, select the "120V ONLY" position.
120/24OV:
The 12OV and 120/24OV receptacles can be used
simultaneously.
12OV ONLY:
ONLY the 12OV receptacles can be used. Do not use
the 120/24OV receptacle in this position. Rated power
will be available at the 12OV twist lock receptacle.
PILOT
LAF(P
VOLTAGE SELECTOR
SWIT/CH
VOLT METER
14