Pilot Lamp; Volt Meter; Voltage Selector Switch (Dual Voltage System) - Honda EM3500SX Owner's Manual

Pilot Lamp

The pilot lamp is illuminated when the generator is operating normally.
It indicates that the generator is producing electrical power at the 120
or 120/240 volt receptacles. If the pilot light is illuminated, the volt
meter should be displaying 120 or 240 volts depending on the position
of the voltage selector switch.
When the auto-throttle is in the AUTO position, and there is no load
connected to the generator, the engine will run slower and the pilot
light will be dimmer than at normal operating speed.

Volt Meter

The volt meter displays the voltage the generator is producing
depending on the position of the voltage selector switch. If the voltage
selector switch is in the ''120/240V'' position, the volt meter will
display 240 volts. If the voltage selector switch is in the ''120V ONLY''
position, the volt meter will display 120 volts.

VOLTAGE SELECTOR SWITCH (DUAL VOLTAGE SYSTEM)

The voltage selector switches the main power carrying windings of the
generator to produce ''120V ONLY'' or ''120/240V''. If a 240V appliance
is connected to the 4-prong receptacle, the switch must be in the ''120/
240V'' position. If only a 120V appliance is being connected to any of
the 120V 3-prong receptacles, select the ''120V ONLY'' position.
120/240V:
120V ONLY:
VOLT METER
The 120V and 120/240V receptacles can be used
simultaneously.
ONLY the 120V receptacles can be used. Do not use the
120/240V receptacle in this position. Rated power will
be available at the 120V twist lock receptacle.
PILOT LAMP VOLTAGE SELECTOR
SWITCH
120V
1 1 2 2 0 0 2 2 4 4 0 0 V V
15