Speco PL200M User Manual page 5

G - COM 4 8 25V 70V
+
0 70V 0
Connecting the speakers with 70V output
8
70V 0 70V
19. AC Voltage Selector
In the US, set the AC Voltage Selector to the left (115V) for power
between 100V and 127V.
20.Monitor Line Out
Monitor Line Out can be connected with another appliance such as an amplifier,
recorder, etc.
21.Monitor 1W8
The terminal is meant for the connection of a small external loudspeaker that gets
driven by an internal auxiliary power amplifier, providing a nominal output of 1Watt.
This could also be used for a "Music on Hold output." Only the mixed audio signal
coming from "AUX IN" is included in the outputted signal.
In addition, the output signal is controlled only by the volume
control of the "CH4" & "CH5" music signal level controls.
22."Priority" Terminal.
When these terminals are short-circuited (i.e. By means
of using an electrical switch), the audio signals coming from "CH4", "CH5", are
attenuated while the signals coming from"CH1", "CH2","CH3" are gaining
priority.
23.Input "AUX Paging"
This terminals input lets you connect to an auxiliary signal . The input features a
"Voice Priority" function, which overrides all other input signals once an auxiliary
message is sent.
24. a. Zone
There are four dip switches here. Push the dip switch up to switch the zone
off and vice versa.
b.Volume
This controls the volume of a sound source connected to
the "Tel Paging". Turning the knob clockwise
increases the volume of the corresponding source. It is recommend to leave
the control of unused inputs at their minimal setting "0".
25.''LINE IN" inputs
An audio source with a high level output signal , such as an AM/FM tuner , a
cassette deck, a CD player, etc.
20 21 22 23
25
5
19
24