Related Manuals for Speco PL200M
Summary of Contents for Speco PL200M
- Page 1 PL200M Speco Technologies 200 New Highway • Amityville, NY 11701 For more information on our products go to: www.specotech.com or contact us at: 1-800-645-5516 www.specotech.com...
- Page 2 Please read this manual carefully before operating this unit for the first time. All rights reserved to Speco Technologies. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden.
- Page 3 SAFETY RELATED SYMBOLS Unplug the product before electrical storms occur and when unused for long periods of time to reduce the risk of electric shock or CAUTION fire. RISK OF ELECTRIC SHOCK DO NOT OPEN External Connection This symbol, wherever used, alerts Always use proper ready-made insulated you to the presence of un-insulated cabling (power cord).
- Page 4 To avoid the risk of electric shock and Servicing damage, do not subject this product to Refer all servicing to qualified service any liquid/rain or moisture. Do not use this personnel only. product when in close proximity to water. Do not perform any servicing other than those instructions contained within the Do not install this product near any direct User's Manual.
- Page 5 19. AC Voltage Selector In the US, set the AC Voltage Selector to the left (115V) for power between 100V and 127V. 20.Monitor Line Out Monitor Line Out can be connected with another appliance such as an amplifier, recorder, etc. 21.Monitor 1W8 The terminal is meant for the connection of a small external loudspeaker that gets driven by an internal auxiliary power amplifier, providing a nominal output of 1Watt.
- Page 6 Model: PL200M Output p ower c apacity: RMS:40W 4; Peak output: 90W 4 CH 1 CH 2 CH 3 CH 4 CH 5 PL200M MULTI-ZONE DISTRIBUTION P.A. AMPLIFIER Frequency response: 50-17000 Hz (-3dB) GAIN GAIN GAIN GAIN GAIN ZONE 1...
- Page 7 CAUTION 14. PL We strongly recommend that you leave the installation of the PL200M system to qualified and experienced service technicians who specialize in connecting This LED is the power indicator. When the amplifier is powered on, this LED electronic equipment.
- Page 8 26.The mono MIC/LINE channels The channels are numbered from 1 to 4. You can connect balanced, low impedance microphones to the XLR socket. On the 1/4" phone jack you can connect either a microphone or a line level instrument. You should never connect an unbalanced microphone to the XLR socket as it could damage both the Microphone and the Mixer.