Table of Contents
Advertisement
LCD Back Light
•
Keypad Backlight.
Use arrow keys to adjust keypad backlight. Press ENTER.
LCD Back Light
5.5.3. Set Key Beep
Turn the key beep on/off.
5.5.4. Set Azi Work Mode
This function will set the mount azimuth mode while performing GOTO. There are two
modes for selection:
AZI +/- 200 degree
AZI free running mode
The "AZI +/- 200 degree" will rotate the mount between -200º and +200º in azimuth
direction to avoid AC/DC power line wrapping. However, the mount may take a longer path to
slew to an object. The "AZI free running mode" will take a shortest path while rotating along the
azimuth direction, which is best for battery operation. The default setting is "AZI +/- 200 degree"
mode.
5.5.5. Reset All
Reset all settings to factory default data.
5.6. Align
This function is used for align the telescope. Before star alignment, please make sure
the mount is well leveled. In addition to "Solarsys Align," the system also provides "One Star
Align" and "Two Star Align". Either one can be selected for telescope alignment.
5.6.1. Solarsys Align
Press "MENU", scroll down the menu and select "Align". Press ENTER and select
"Solarsys Align". Select any one of the listed solar system object as your alignment target, such
as Moon. Press ENTER. If the Moon is above the horizon, the telescope will auto slew to it. If
16
Advertisement
Table of Contents
