Table of Contents
Advertisement
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
1.
Turn the engine switch and fuel tank cap vent lever to the OFF
position (see page
2.
Loosen the cover screw and remove the maintenance cover (see
page 43 ).
3.
Place a suitable container next to the engine to catch the used oil.
4.
Remove the oil filler cap/dipstick, and drain the oil into the container
by tipping the engine toward the oil filler neck.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
5.
With the engine in a level position, fill to the upper limit of the oil
filler neck with the recommended oil (see page
6.
Reinstall the oil filler cap/dipstick securely.
7.
Reinstall the maintenance cover and tighten the cover screw
securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
SERVICING YOUR GENERATOR
26
) to reduce the possibility of fuel leakage.
46
).
UPPER LIMIT
45
Advertisement
Table of Contents
