Alpine iDA-X100 Quick Reference Manual page 60

On / Off (Initial setting)
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to page 30).
• The function is inoperable when Defeat is set to ON.
Ju'~lt'$f~~~w~!8r:QNio~~;
Subwoofer On (Initial setting) / Subwoofer Off
If an optional subwoofer is connected to the unit, make the following
setting.
When the subwoofer is on, you can adjust the subwoofer output level
(refer to page 18).
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPod, will be able to reproduce the music clearly even in cars with a lot
of road noise.
Sys
1 (Initial setting) / Sys 2
When the subwoofer is on, you can select either Sys I or Sys 2 for the
desired subwoofer effect.
Changing the source to which you want to apply Media
Xpander.
FM (Level 1 to 3, Non Effect):
Sys 1 :
Sys 2:
Subwooler level changes according to the main
volume setting.
Subwooler level change is different from the main
volume setting. For example, even at low volume
settings. the subwooler is still audible.
The medium to high frequencies become clearer, and produces
well balanced sound at all frequencies.
CO (Level 1 to 3, Non Effect):
CD mode processes a large amount 01 data during playback.
MX takes advantage 01 this large data quantity to reproduce a
more clear, clean output.
Normal (Initial setting) / Reverse
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Subwooler stereo (UR) output
Subwooler monaural output
Stereo:
Mono:
·.·~"ij}"~9:~!:$~~\!99f,~~I2ltafu",!1S.~~E_ •
Stereo (Initial setting) / Mono
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
Maker's (Initial setting) / User's
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to 0 dBI
oct in 3WAY mode (see "Adjusting the Crossover Settings" on page 32),
as speaker damage may result.
Maker's: As protection Irom possible speaker damage, 0 dB/
oct cannot be set lor the response slope 01 the high
range speaker in 3WAY mode.
User's: The 0 dB/oct setting is possible in 3WAY mode.
• You can set to Tweeter only when the system switch on the IMPRINT
audio processor (PXA-H 100) is set to 3WAY.
'SettinQ;!9,rn!id~;,~:mz~r~t_
iV',,"
""~'
Graphic / Parametric (Initial setting)
This setting gives you a choice of 5-band parametric, or 7-band graphic
equalizer.
• Thefunction is inoperable when Defeat is set to ON.
· 7~~ij~i.i~!ill!~@!!',e@1!I:rx';!'~~'i."
FlatlPopsIRocklNewslJazz&BluesiElectric DancelHip Hop
&RaplEasy ListeninglCountrylClassicallUser
1-6*
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
• To cancel MX mode for all music sources. set MX to Off in step 4.
• Each music source, such as FM radio. CD, and MP3IWMAlAAC can
have its own MX selling.
• When the source changes from "MP3IWMAlAAC to CD-DA" or
"CD-DA to MP3IWMAlAAC". MX-mode switching may delay
playback slightly.
• Selling to MX Offsets MX mode ofeach music source to Off.
• There is no MX modefor AM radio.
• The function is inoperabLe when Defeat is set to ON.
This corrects inlormation that was lost at the time 01
compression. This reproduces a well-balanced sound close to
the original.
OVO (Video CD)
(Level 1 to 2 (MOVIE), Non Effect):
The dialogue portion 01 a video is reproduced more clearly.
(Level 3 (MUSIC), Non Effect):
A DVD or Video CD contains a large quantity 01 data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (Level 1 (MP3IWMAlAAC/iPod/Sluetooth Audio), Level 2
(MOVIE), Level 3 (MUSIC), Non Effect):
Choose the MX mode that corresponds to the media connected.
II two external devices are connected, a different MX mode lor
each media can be selected.
MP3IWMAlAAC/iPodIBluetooth Audio (Level
1
to 3, Non Effect):
*
By selecting User's I to
6,
you can recall the stored EQ Adjustment
value in "Storing and Recalling the Adjusted Contents" (page 33).
• The function is inoperable when Defeat is set to ON.
30-EN
On / Off (Initial setting)
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to page 30).
• The function is inoperable when Defeat is set to ON.
Ju'~lt'$f~~~w~!8r:QNio~~;
Subwoofer On (Initial setting) / Subwoofer Off
If an optional subwoofer is connected to the unit, make the following
setting.
When the subwoofer is on, you can adjust the subwoofer output level
(refer to page 18).
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPod, will be able to reproduce the music clearly even in cars with a lot
of road noise.
Sys
1 (Initial setting) / Sys 2
When the subwoofer is on, you can select either Sys I or Sys 2 for the
desired subwoofer effect.
Changing the source to which you want to apply Media
Xpander.
FM (Level 1 to 3, Non Effect):
Sys 1 :
Sys 2:
Subwooler level changes according to the main
volume setting.
Subwooler level change is different from the main
volume setting. For example, even at low volume
settings. the subwooler is still audible.
The medium to high frequencies become clearer, and produces
well balanced sound at all frequencies.
CO (Level 1 to 3, Non Effect):
CD mode processes a large amount 01 data during playback.
MX takes advantage 01 this large data quantity to reproduce a
more clear, clean output.
Normal (Initial setting) / Reverse
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Subwooler stereo (UR) output
Subwooler monaural output
Stereo:
Mono:
·.·~"ij}"~9:~!:$~~\!99f,~~I2ltafu",!1S.~~E_ •
Stereo (Initial setting) / Mono
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
Maker's (Initial setting) / User's
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to 0 dBI
oct in 3WAY mode (see "Adjusting the Crossover Settings" on page 32),
as speaker damage may result.
Maker's: As protection Irom possible speaker damage, 0 dB/
oct cannot be set lor the response slope 01 the high
range speaker in 3WAY mode.
User's: The 0 dB/oct setting is possible in 3WAY mode.
• You can set to Tweeter only when the system switch on the IMPRINT
audio processor (PXA-H 100) is set to 3WAY.
'SettinQ;!9,rn!id~;,~:mz~r~t_
iV',,"
""~'
Graphic / Parametric (Initial setting)
This setting gives you a choice of 5-band parametric, or 7-band graphic
equalizer.
• Thefunction is inoperable when Defeat is set to ON.
· 7~~ij~i.i~!ill!~@!!',e@1!I:rx';!'~~'i."
FlatlPopsIRocklNewslJazz&BluesiElectric DancelHip Hop
&RaplEasy ListeninglCountrylClassicallUser
1-6*
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
• To cancel MX mode for all music sources. set MX to Off in step 4.
• Each music source, such as FM radio. CD, and MP3IWMAlAAC can
have its own MX selling.
• When the source changes from "MP3IWMAlAAC to CD-DA" or
"CD-DA to MP3IWMAlAAC". MX-mode switching may delay
playback slightly.
• Selling to MX Offsets MX mode ofeach music source to Off.
• There is no MX modefor AM radio.
• The function is inoperabLe when Defeat is set to ON.
This corrects inlormation that was lost at the time 01
compression. This reproduces a well-balanced sound close to
the original.
OVO (Video CD)
(Level 1 to 2 (MOVIE), Non Effect):
The dialogue portion 01 a video is reproduced more clearly.
(Level 3 (MUSIC), Non Effect):
A DVD or Video CD contains a large quantity 01 data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (Level 1 (MP3IWMAlAAC/iPod/Sluetooth Audio), Level 2
(MOVIE), Level 3 (MUSIC), Non Effect):
Choose the MX mode that corresponds to the media connected.
II two external devices are connected, a different MX mode lor
each media can be selected.
MP3IWMAlAAC/iPodIBluetooth Audio (Level
1
to 3, Non Effect):
*
By selecting User's I to
6,
you can recall the stored EQ Adjustment
value in "Storing and Recalling the Adjusted Contents" (page 33).
• The function is inoperable when Defeat is set to ON.
30-EN