ADTRAN Express 6100 Manual page 3

FCC regulations require that the following information be provided
in this manual:
1. This equipment complies with Part 68 of the FCC rules.
On the bottom or side of this equipment is a label that
ocntains, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN), if appli-
cable, for this equipment. If required, this information
must be given to the telephone company.
2. The following information may be required when apply-
ing to your local telephone company for leased line facili-
ties.
Service Type REN/SOC
ISDN 6.0N
3. An FCC-compliant telephone cord and modular plug may
be provided with this equipment. This equipment is
designed to be connected to the telephone network or pre-
mises wiring using a compatible modular jack which is
Part 68-compliant. See installation instructions for details.
4. If this equipment causes harm to the telephone network,
the telephone company may temporarily discontinue ser-
vice. If possible, advance notification is given; otherwise,
notification is given as soon as possible. The telephone
company will advise the customer of the right to file a
complaint with the FCC
5. The telephone company may make changes in its facili-
ties, equipment, operations, or procedures that could
affect the proper operation of this equipment; advance
notification and the opportunity to maintain uninter-
rupted service are given.
6. If experiencing difficulty with this equipment, please con-
tact ADTRAN (see inside back cover) for repair and war-
ranty information. The telephone company may require
this equipment to be disconnected from the network until
the problem is corrected or until it is certain the equip-
ment is not malfunctioning.
7. This unit contains no user serviceable parts.
To ADTRAN service personnel: For continued protection against risk of
fire, replace F1 with the same type and rating of fuse only: .2A, 250V.
FIC USOC
02IS5 RJ49C
iii