Honda HRA214 Owner's Manual page 32

DRIVE CLUTCH FREE PLAY
(Self-propelled type only)
1. Measure free play at the top of the lever as shown;
it should be between S-10 mm (3/16-3/8 in).
2. If adjustment is necdssary, loosen the lock nuts
and turn them to run the adjuster up or down as
required. Tighten the lock nuts and recheck free
play.
3.
Start the engine and check to be sure the drive
clutch engages and releases properly. .
5-10 mm (3/16-3/6 in
30