Throttle Control Cable Adjustment - Honda HRA214 Owner's Manual

THROTTLE CONTROL CABLE ADJUSTMENT
1. With the throttle lever in the "CHOKE" position,
the carburetor choke arm should move all the way
to the right, as far as it will go. Push the choke
arm with your finger to check whether it is all the
way to the right.
2. If adjustment is necessary, loosen the control cable
lock nuts, and move the adjuster up or down as
required. Tighten the lock nuts, and recheck the
carburetor choke arm position.
3. Start the engine, and make sure the engine stops
when the throttle lever is moved to the "STOP"
position. Readjust the cable if necessary.
I
CHOKE ARM
CHOKE
OTTLE LEVER
28