Table of Contents
Advertisement
XDM6400 OPERATION . .
Bluetooth® Operation (Optional)
Press. once. An "_" will appear on the display.
Making a Phone Call
Last Number Dialing
Receiving a Phone
Call
Refusing a Call
During a Phone Call
Audio Transfer
Call Waiting
Call Hold
Ending a Phone Call
Input the desired phone number using the 0-9. *.
#
buttons on the
head unit front panel. Press. to begin dialing.
A phone call may also be placed from your mobile device using
the keypad. phone book or speed dial. When a call is placed from a
mobile device. "DIALING" will appear on the head unit display.
To enter last number dialing mode. press •. then press. a second
time. The head unit will display "Last Number Dialing."
Press KEY 0 to cycle through the received. dialed or missed call
categories. Rotate the rotary encoder to cycle through the last
5
calls
in the selected category.
Press. to begin dialing the selected number. "DIALING" will appear
on the head unit display.
If an incoming call is detected. the head unit will automatically switch
to Bluetooth mode. muting any current audio.
The incoming phone number will scroll across the display. the phone
icon will flash on the display. and a ring tone will be audible from the
vehicle speakers. See Bluetooth Settings for speaker configurations.
Note: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile device
is off. you may not hear an incoming ring tone.
Press. on the head unit or BTM60 to receive a call. The phone icon
will illuminate solid.
To refuse an incoming phone call. press and hold MUTE for
3
seconds.
The head unit will display the elapsed time of the phone call.
The rotary encoder will adjust the volume of the call.
Press MUTE to select between microphone on (MIC ON) and
microphone off (MIC OFF).
To transfer the phone call between the head unit and the mobile
device. press and hold DISP for
3
seconds during a call.
Tip: transfer audio to your mobile device before turning the head unit
off.
When a second call is incoming. press. to activate call waiting. The
current call will be placed on hold. and the second call will be active.
Press. again to return to the first call.
Press TALK to place the current call on hold. To resume the phone
call. press TALK again.
Hold MUTE for 3 or more seconds to end a call.
If the phone call was received. the head unit will return to previous
mode when call is ended.
21
Advertisement
Table of Contents
