Dcp (Detachable Control Panel) - Clarion CZ309 Owner's Manual

DCP Rear Panel
Note:
• If the DCP is dirty, wipe off the dirt with
a
soft, dry
cloth only.
DCP
connector
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• When the Release button is pressed and
the DCP is unlocked, the car's vibrations
may cause it to fall. To prevent damage to
the DCP, always store it in its case after
detaching it.
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, pens,
screwdrivers, etc.
Storing the DCP in the DCP Case
Hold the OCP, in the orientation as shown in the
figure below, and put it into the supplied OCP
case. (Ensure the DCP is in the correct
orientation.)
Attaching the DCP
1. Insert the right side of the OCP into the main
unit.
2. Insert the left side of the OCP into the main
unit.
4. DCP (DETACHABLE CONTROL PANEL)
*
The OCP is unlocked
3. Remove the OCP.
Removing the DCP
1. Press the [SRC] button for 1 second or
longer to switch off the power.
2. Press in the [RELEASE] button.
[RELEASE] button
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the OCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the OCP with you when
leaving the car.
6
CZ309