Configuring S/Pdif Out - Gigabyte G1.Sniper Z97 User Manual

6-2-3 Configuring S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to the corresponding S/PDIF out connector
as shown below and an external decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF coaxial cable Connects to a S/PDIF optical cable
2. Configuring S/PDIF Out:
Step 1:
While in the operating system, right-click on the icon
in the notification area and select Playback devices.
Step 2:
On the Playback tab, right-click on SPDIF Out, select
Set as Default Device, and then open the Properties
dialog box.
Step 3:
You can go to the Supported Formats tab to select the
formats to be decoded or the Advanced tab to select the
sample rate and bit depth.
Appendix - 100 -