Gigabyte G1.Sniper Z97 User Manual page 40

The C6/C7 state is a more enhanced power-saving state than C3. Auto lets the BIOS automatically configure
this setting. (Default: Auto)
& CPU Thermal Monitor
Enables or disables Intel
®
the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& CPU EIST Function
(Note 1)
Enables or disables Enhanced Intel
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production. Auto lets the BIOS automatically configure this setting.
(Default: Auto)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
The first memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
` Advanced Memory Settings
(Note 1) This item is present only when you install a CPU that supports this feature. For more information about
Intel CPUs' unique features, please visit Intel's website.
®
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
BIOS Setup
(Note 1)
Thermal Monitor function, a CPU overheating protection function. When enabled,
Speed Step Technology (EIST). Depending on CPU loading, Intel
®
(Note 2)
- 40 -