Language Pack; Firmware - D-Link DHP-W306AV User Manual

Section 3 - Configuration
You can upgrade the firmware of the access point from this page. Make sure the firmware you would like to use is
on the local hard drive of your computer. Click Browse... to locate the firmware file to be used for the update. Please
check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades
to your hard drive from the D-Link support site.

Firmware

Click on the Check Now button to find out if there
Information:
is an updated firmware or language pack version.
If a new version exists, download the new firmware
to your hard drive.
Firmware
After you have downloaded the new firmware, click
Upgrade:
Browse to locate the firmware update on your
hard drive. Click Upload to complete the firmware
upgrade.

Language Pack

To upgrade the language pack, follow these steps:
Upgrade:
1. Click the Browse button to locate the D-Link
language pack upgrade file on your computer.
Note: Language pack file extension will be *.lng
2. Once you have found the file, click the Upload
button to begin the language pack upgrade
process. This can take a minute or more.
3. Wait for the device to reboot. This process can
take about 75 seconds.
D-Link DHP-W306AV User Manual
Firmware
35